Welcome: Shenzhen Tengyusheng Technology Energy Co., Ltd
Language: 中文版 ∷  英文版 ∷   россия 
   Home   |   News|   How to place the wireless router antenna?

How to place the wireless router antenna?

How to place the wireless router antenna?

 

How is the router antenna placed? The following is the correct placement of the wireless router antenna

 

In life, we often want to get the wif signal as strong as possible, then how to place the wireless router antenna? Get the best Wi-Fi signal

1. First put it in a central location. Radio signals are not only broadcast in one direction.

2. Put the router in a higher position.

3. Reduce walls and stay away from windows.

4. Clear the obstacles.

5. Avoid interference and noise.

6. Reposition the antenna.

 

1. Put it in a central position

Radio signals are not only broadcast in one direction. Instead, it is more like a ripple in the water, the router is dead, and the coverage is radiating outward. If you place your router in a corner of your home, or set it on one end or the other, you might cut the available coverage by half. Another thing to consider is that the signal is stronger at a closer distance, so you need to reduce the distance between the router and any connected devices, and put the wifi signal around to the center.

2. Put the router in a higher position

Radio waves can radiate not only horizontally but also vertically. The router is at the center, and the wifi signal transmits signals to the surroundings like a sphere. In order to reduce signal attenuation or signal interruption shielding interference, the router can be placed at a higher position to obtain a better signal, compared to being placed on the ground.

If you are in a multi-storey home, you also need to consider how to cover different floors. For a two-story home, the best location will be near the ceiling on the first floor, or close to the second floor, providing consistent coverage upstairs and downstairs. Placed at a distance from the two points, the signal can be evenly radiated to the range you want.

 

3. Reduce walls and stay away from windows

Radio signals are best transmitted through the open air. Ideally, you will always have a direct line of sight between your device and your router, but this is rarely possible when trying to cover multiple rooms in your home. However, most building materials can still be used with Wi-Fi signals - wooden beams and drywall will not destroy the signal too much, nor will the glass. Pay attention to denser materials, such as concrete or bricks, which absorb radio waves more than ordinary wood and drywall. That is, if the number of walls between the device and the router is kept to a minimum or not, the received signal will be the best. Also be careful not to put the router in a closet or in a box or around something very messy, as these materials can attenuate or kill the transmission of the signal.

Also note that keep the router away from the window. Glass does not have much effect on blocking wireless signals, which means that if placed on the side of the window, your WI-FI signal can easily spill into the yard or directly into the neighbor's home.


4. Clear obstacles

The material that is most likely to mess with Wi-Fi signals is not wood, not glass, or concrete. It is metal. Whether it's a shelving unit, a steel desk, a kitchen refrigerator or a basement water heater, large metal objects reflect and absorb Wi-Fi signals, creating a dead zone. If your router is next to a metal object,

Then your WIFI device can't always transmit a good signal.

 

There is also a blind spot, another Wi-Fi barrier you might not have thought of is water. As a liquid, water has a higher density than air, especially a large amount of water, such as an aquarium. You may like to raise fish, but placing the router next to the aquarium will definitely have a negative impact on your wireless performance. For best results, keep the router a few feet away from any large amounts of water and try to place the router above the aquarium, as far as possible against the aquarium.

 

5. Avoid interference and noise

Physical barriers are easy to spot, and many wireless anti-jamming waves are not easy to find. Many devices will use the same 2.4-GHz radio band as the router. Everything from wireless phones to Bluetooth speakers to baby monitors shares this TV broadcast, and things get very crowded. If you are in a compact community or apartment building and try to choose a router that provides 5 GHz coverage, consider switching to that router only because it is less congested.

6. Reposition the antenna.

If the signal is still not very good, you can reposition the antenna, check the strength of each position signal, and confirm the optimal placement of your wifi device.